Router Bits

CMT 855.701.11 Flute & Bead Set, 1/2" Shank, Carbide-Tipped

CMT 890.504.11 Horizontal Raised Panel Bit, 1/2-Shank, 3-1/2-Inch Diameter, Carbide-Tipped

This bit is great for making classic raised panel doors. We recommend working between 10.000 and 12.000 RPM, from 3 to 5 passes. Equipped with a bearing for easy template work, this tool features...

CMT 823.364.11B Slot Cutter with Arbor & Bearing, 1/2-Inch Shank

This versatile slot cutter provides a variety of cutting options. Using a countersunk bolt the cutter can be mounted at the end of the arbor to allow undercutting; great for making lock rabbet joints...

CMT 838.285.11 Roundover Bit, 1/4-Inch Shank, 5/16-Inch Radius

These versatile bits are always in demand - the simple clean lines of a smooth round over edge can be used in a wide variety of applications from picture frames to table and counter tops. Available...

CMT 812.629.11, Straight Bit, 1/2-Inch Shank, 1/2-Inch Diameter

This straight bit features long cutting length and overall length. It can withstand even the heaviest work load and still give you a smooth, precise cut every time. They also provide exceptional chip...

CMT 838.445.11 Roundover Bit, 1/4-Inch Shank, 5/8-Inch Radius, Carbide-Tipped

This bit provides you with a particular rounded profile, ending up with an elegant bead on the top. Use this tool for simple tasks such as easing sharp corners or for more intricate jobs such as...

CMT 811.191.11B Pattern Bit, 1/4-Inch Shank, 3/4-Inch Diameter

Carbide tipped to last longer, this bit is equipped with the bearing above the cutter letting you work with the template on top of the wood. This gives you a clear view of what you are routing so you...

Festool 497870 12mm Domino Cutter DF 700

12mm cutter for the Domino XL DF 700 Joiner For use with 12mm tenons

Amana Tool - 46196 Solid Carbide UltraTrim Spiral 1/8 Dia x 3/8 x 1/4" Shank with Bras

This spiral flush trim Bit is used for acrylic, wood and MDF up to a 1/4" Thick, for getting into tight corners with a small radius and great for cleaning out your edges. Due to extremely small...

Amana Tool - (53406) Slotting Cutter Assembly 3 Wing x 1-7/8 Dia x 1/8 x 1/4" Shank

Groove edges for Molding, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting Cutters are available with either 2-wing or 3-Wing cutters. Each assembly includes a...

Amana Tool - 47152 Carbide Tipped No-File Trim .059 Radius x 1/2 Dia x 3/8 x 1/2" Shan

Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. Our no-file bit "breaks" The sharp edge As it trims the laminate flush. When used properly, the...

Amana Tool - 49112 Carbide Tipped Cove 3/8 Radius x 1-1/8 Dia x 9/16 x 1/4" Shank

The covetto form – produced by the cove Bit – is one of the classic building blocks for many molding profiles. Use it alone or in combination with Beads and fillets. Use the cove to detail The edges...